Use your existing door and window contacts, motion sensors and more.
The Ring Retrofit Alarm Kit is designed to integrate existing wired contact sensors from older alarm systems into the Ring Alarm system. It allows homeowners to reuse the wired sensors already installed on doors and windows, instead of replacing them with new wireless ones. Here’s how it works:
Key Components:
1. Retrofit Alarm Kit Module: The main device that connects to the wired sensors.
2. Power Adapter: Supplies power to the Retrofit Kit.
3. Wiring Terminals: For connecting the existing sensor wires.
4. Ring Alarm Base Station: Acts as the central hub for the Ring Alarm system (sold separately).
How It Works:
1. Compatibility Check:
Ensure your existing wired sensors are compatible. The Retrofit Kit works with most simple wired contact sensors (e.g., those that detect door/window opening).
2. Installation:
• Power Off the Old System: Disconnect the old alarm panel to prevent interference.
• Connect Sensor Wires: Open the Retrofit Alarm Kit module, and connect the wires from each sensor zone to the labeled terminals in the module.
• Mount the Module: Secure the Retrofit Kit module near the existing wired sensors or where the old panel was located.
3. Integration with Ring:
• The Retrofit Kit connects wirelessly to the Ring Alarm Base Station via Z-Wave.
• Use the Ring App to configure the system, assign names to each sensor zone, and test their functionality.
4. Functionality:
Once set up, the wired sensors will operate as part of the Ring Alarm system. You’ll receive notifications through the Ring app whenever a sensor is triggered.
Features:
• Preserves Investment: Reuses existing wired sensors, reducing the need for new equipment.
• Battery Backup: Ensures the Retrofit Kit continues working during a power outage (requires connection to the Ring Alarm Base Station).
• Custom Zones: Supports multiple zones (up to 8), allowing different areas to be monitored independently.
• Professional Monitoring: If you subscribe to Ring Protect Pro, the wired sensors integrated with the Retrofit Kit can be professionally monitored.
Limitations:
• It only works with wired contact sensors (e.g., door/window sensors). Motion sensors and other devices from older systems aren’t compatible.
• Requires the Ring Alarm Base Station to function.
• Internet or cellular backup (via a Ring Protect subscription) is needed for remote access and notifications.
This kit is ideal for those transitioning from an older wired alarm system to Ring, allowing a seamless upgrade without wasting existing hardware.